Accessories and Solvents

Accessories and Solvents

Accessories and Solvents

    YMC offers an optimum connector to avoid connection problems in HPLC, such as dead volumes: MarvelXACT™-connectors*.

    To use YMC’s guard cartridges YMC provides two guard cartridge holder systems to guarantee the optimum protection for every YMC analytical column. For semi-preparative columns guard cartridge holders are also available.

    YMC also offers a selection choice for chromatography consumables and liquid handling. Consumables are available from Chromacol and National Scientific. In addition, a broad range of tubing for chromatography applications is available.

    *Distribution only in Germany, Switzerland and Austria

    Perfect UHPLC-Connection for Simple Liquid Chromatography - MarvelXACT™

    Ensure a perfect connection with the new MarvelXACT™ Fitting System for simple liquid chromatography. Build with robust bioinert PEEK and stainless steel, MarvelXACT™ can be connected and disconnected more than 100 times.The connection system incorporates flexible 1/32” OD capillary tubing to easily route through the system. It is compatible with 10-32 coned ports and absolutely fingertight.

     

    Key Features

    • Exact tightening with a haptic “click”
    • Zero dead Volume
    • Flexible 1/32” tubing
    • True biocompatibility
    • Fingertight to UHPLC
    • Small and accessible in tight spaces
    • Can be connected and disconnected more than 100 times

    Analytical Guard Column Holder

    external holder XPGCH-Q1/2

    YMC offers two different analytical guard cartridge holder concepts. The universal finger tight system is for all column internal diameters from 1.0 to 4.6 mm id (XPGCH-Q1 for 10 mm cartridges and XPGCH-Q2 for 20 mm cartridges).

    This system guarantees a low dead volume connection between the guard cartridge and the main column irrespective of the type of column fitting used. The guard cartridge holder gives leak-proof connection to the analytical column up to 8,000 psi (550 bar).

    internal holder XPGCS-Q1/2

    In addition YMC offers a specific integral guard cartridge holder (XPGCS-Q1 for 10 mm and XPGCS-Q2 for 20 mm length cartridges with 1.0; 2.1; 3.0 or 4.0 mm inner diameters).

    This holder is screwed directly on the YMC cartridge column system in place of the removable end fitting (part numbers ending in QT). The guard cartridges are inserted in the holder cavity without the need to use any tools. These integral guard cartridge holders will not attach to columns with part numbers ending in WT or PT.

     

     

    Semi preparative Guard Cartridge Holder

    For semi-prep columns cartridges and holders of 20 mm length and 30 mm inner diameter are available (more dimensions on request).

    For semi-prep columns cartridges and holders of 10 mm length by 20 mm inner diameter and 30 mm inner diameter are available.

    As the holder for these cartridges feature Parker-compatible fittings (port depth 0.09 inch). It is essential that slip-free fittings (such as Sure-Fit™ connectors) are used or specially made stainless steel fittings with stainless steel capillaries are made up so that differences between Valco-compatible (port depth 0.08 inch), Parker-compatible (port depth 0.09 inch) and/or Waters-compatible (port depth 0.13 inch) column endfittings can be accommodated.

    Due to the higher flowrates involved in semi-prep and prep chromatography the use of PEEK capillaries should be avoided if possible.

    The part number of semiprep guard cartridges ends -CC (e.g. AA12S05-0120CC for 20 mm i.d. and AA12S05-0130CC for 30 mm i.d.). The part numbers for the guard cartridge holders are XPCHSPW2 (20 mm i.d.) or XPCHSPW3 (30 mm i.d.).

    Stainless Steel Precolumn Filter

    Filter construction with minimal dead volume

    Effective diameter of the filter is extremely small, about 1.6 mm. Sample diffusion orccuring in the passage is minimised.

     

    HIgh pressure resistance

    Stainless Steel filters can stand pressures up to 60 MPa / 600 bar / 8,700 psi.

     

    PEEK Precolumn Filter

    Metal-free

    The material of the wetted part of the holder is PEEK and that of the filter is a mixture of PEEK and Teflon. PEEK precolumn filters are suitable for use in HPLC systems requiring a metal-free environment.

     

    High pressure resistance

    PEEK precolumn filters tolerate pressures up to 35 MPa /350 bar / 5,080 psi.

    Vials

    Sie suchen Probenflaschen, Kappen und Septen für das Probenhandling?  

    Sie arbeiten mit Autosamplern? In den Produktlinien von Chromacol und

    National Scientific finden Sie für nahezu jede Probe und Anwendung die

    geeignete Probenflasche inklusive Kappe und Septum.

     

     

    Rund um die (U)HPLC

    • Kapillaren
    • Schläuchen
    • „Hoch und- Niederdruckfittings“ aus Kunststoff und Stahl
    • Safety Products
    • Filter
    • Fritten
    • Sample Loops und Rheodyne Artikel

    Pumpenzubehör

    • Valco Fittings
    • Adpater, z.B. Fused-Silica
    • Connector, Unions, Filter
    • Valco Valves, Diaphragm Valves, Cheminert Valves
    • Actuators and Accessories

    Fittinge

    Fittings für verschiedene Applikationen.

    • Low pressure, high pressure, very high pressure
    • Metrisch und zöllisch

    Choice Filter-Spritzenvorsatzfilter

    Häufig bedarf die Probenvorbereitung vorab einer Filtration der Probe durch einen Spritzenvorsatzfilter. Mit den Thermo Scientific Spritzenvorsatzfiltern steht YMC ein hochwertiges Produktportfolio zur Verfügung: Infoflyer.

     

    YMC Schlauchsortiment

    YMC bietet Ihnen ein vielseitiges Angebot von Schläuchen für verschiedenste Anwendungsbereiche. Die bei YMC verfügbaren Schläuche finden sowohl Anwendung im chemischen Bereich als auch in der Industrie.

    Zum YMC Sortiment gehören:

    • Schläuche von Saint Gobain
    • Silikon Schläuche
    • PTFE und FEP Schläuche
    • PA, PE und PU Schläuche
    • Viton Schläuche
    • uvm. 

    Laden Sie sich  unser Formular zur Schlauchauswahl und unsere Übersicht über unser Schlauchsortiment herunter.

    LGC Standards Lösungsmittel

    Lösungsmittel, Säuren und Standards in verschiedenen Reinheitsgraden und Zusammensetzungen ergänzen das Zubehörangebot von YMC.

    Title Document Type Language Phase Type Download
    Analytical Guard Column Filter Care and Use Care and Use Instructions E
    Analytical Guard Column Holder Care and Use Care and Use Instructions E
    Semi prep. Guard Column Holder Care and Use Care and Use Instructions E
    Flyer MarvelXACT UHPLC-Verbinder Flyer D
    Guard column holder analyt. Product Information E Please login
    Overview on YMC-Hardware Types in Combination with YMC-Phases Product Information E
    Vorsäulenhalter analytisch Product Information D Please login

    Please login to see the prices (if needed insert link to login page).

    Product Description Price (EUR) Stock
    XPCHSPW1 External semi-preparative Guard Cartridge Holder for 10.0 mm Guard Cartridges -
    XPCHSPW2 External semi-preparative Guard Cartridge Holder for 20.0 mm Guard Cartridges -
    XPCHSPW3 External semi-preparative Guard Cartridge Holder for 30.0 mm Guard Cartridges -
    XPCHUHP UHPLC Guard Cartridge Holder for 5 mm Guard Cartridges -
    XPGCH-Q1 External Guard Cartridge Holder to screw on Head for 10 x 1-4.6 mm Guard Cartridges -
    XPGCH-Q2 External Guard Cartridge Holder to screw on Head for 20 x 1-4.6 mm Guard Cartridges -
    XPGCS-Q1 Direct Connect Guard Cartridge Holder for 10 mm Guard Cartridges -
    XPGCS-Q2 Direct Connect Guard Cartridge Holder for 20 mm Guard Cartridges -
    XRPRCP02 Precolumn Filter 2 µm for 1/16" o.d. + Holder, PEEK (350 bar) -
    XRPRCP25 Replacement Precolumn Filter 2 µm for 1/16" o.d., PEEK (350 bar) -
    XRPRCS02 Precolumn Filter 2 µm for 1/16" o.d. + Holder, stainless steel (600 bar) -
    XRPRCS25 Replacement Precolumn Filter 2 µm for 1/16" o.d., stainless steel (600 bar) -
    • 2-3 days
    • 1-2 weeks
    • 3-4 weeks

    Related Categories

    Contact

    • Eva Lisken
    • Marketing Assistant Accessories
    • ph. +49 (0)2064 427-287