Atlas Potassium

Atlas Potassium

Atlas Potassium

    Atlas Potassium

    The Atlas Potassium is designed for chemists who perform reactions in jacketed reactors from 50ml to 5 litres. Without the need for a PC, the intelligent base can control and log temperatures, stirrer speed and other sensors. The design allows vessels and stirrers to be changed in minutes.

    Quick change vessel: The oil drain unit, jacketed vessel clamp and quick oil connectors allow vessels to be changed in under a minute.
    Automated reactions without PC control: Set points, ramps, or sophisticated profiles are all possible for reaction temperature and stirrer speed.
    Easy to upgrade: A wide range of accessories are available including vessels, stirrers, probes, etc.
    Intelligent: Atlas Potassium allows users to edit and run profiles automatically from the base to control, heating/cooling from circulator, stirring and reagent addition.
    Easy to use: No tools required, twist and click control knob, large display and intuitive.
    Full data capture: Data such as temperatures and stirrer speed is logged in a .csv file and can be downloaded to a USB stick.
    Small footprint: 23cm (9”) square easily fits into fume cupboards.
    Robust: Specifically designed for use in chemical laboratories.
    Wide temperature range: -80 to +200°C.

     

    Atlas Potassium System

    The Atlas Potassium can be configured into a variety of different systems for different applications. Syrris modules are automatically detected and other manufacturers hardware can be controlled and logged via RS232 using the Atlas Software.

     

    Atlas Potassium System features

    The Atlas Potassium is a flexible and interchangeable controlled laboratory reactor. With an easy to use vessel clamping system and integral oil drain module, Atlas Potassium vessels can be changed in under a minute. Intelligent control without a PC from the base or advanced control from the Atlas Software makes Atlas truly versatile.

    An Atlas Potassium System can be upgraded with:

    Volumetric Dosing: Add the Atlas Syringe Pump for versatile volumetric dosing that consists of two syringes (pictured below) e.g. dose many reactors at a time or have temperature dependant dosing.
    Gravimetric Dosing: Allows a defined mass of reagent to be pumped from a balance to the reactor by a controlled peristaltic pump.
    Calorimetry: Use Heat Flow Calorimetry (HFC) or Power Compensation Calorimetry (PCC) to generate power and enthalpy graphs with the click of a button.
    Software: Adding PC Software allows complex recipe control, real time data plotting and control of third party hardware.
    pH Control: This can be configured to control the pH of a reaction by adding either acid and/or base as necessary to maintain a set pH value.
    Turbidity Sensing: Use the Atlas Turbidity system for processes that involve crystallization steps.
    Remote Mount: Allows jacketed reactors up to 5 litres to be mounted safely onto laboratory scaffolding and be remote from the base.

     

    Specifications

    Working Volume Options: 50ml, 100ml, 250ml, 500ml, 1 litre, 2 litres, 3 litres or 5 litres (vessels are interchangeable). Note that vessels greater than 2 litres also require the Remote Mount.
    Reaction Vessel Profile Options: Round bottom, torispherical or conical. Custom available on request.
    Stirrer Options: Anchor, pitched blade propeller, retreat curve (in glass or PTFE), custom available on request.
    Chemical Resistance: All wetted parts made from glass and PTFE (or other similar fluoropolymers)
    Maximum Temperature: +200 °C (+250 °C with High Temperature Upgrade Kit). The maximum temperature achievable is also circulator dependent.
    Minimum Temperature: -80 °C. The minimum temperature achievable is also circulator dependent.
    Temperature Accuracy: Class A RTDs, displayed to 3 decimal places. PID temperature control of process temperature.
    Pressure: Vacuum (50mbar) to 0.5 bar (see Atlas Pressure Systems for high pressure).
    Overhead Stirring: Scorpion Overhead Stirrer to 800RPM with 11Ncm Torque (High torque options available to 180Ncm peak, 90Ncm continuous with speed of 1000RPM and torque feedback).
    Modes of Operation: Manual (set on Atlas Base), Automated (set on Atlas Base) or full PC Software control.

     

    System Details
    Stirrer - PTFE 4 Blade Propeller 300mm x 40mm dia
    Stirrer - PTFE 4 Blade Propeller 400mm x 40mm dia
    Stirrer - PTFE 4 Blade Propellor 500mm x 40mm dia
    Stirrer - PTFE Anchor 300mm x 80mm dia
    Stirrer - PTFE Anchor 400mm x 80mm dia
    Stirrer - PTFE 2 Blade Centrifugal 300mm
    Scorpion Overhead Stirrer
    Support Rods (Pack of 2)
    Stirrer Seal and Guide
    Jacketed Vessel Clamp
    Oil Drain Unit
    Oil Pipes from Reactor to Oil Drain Unit (Pack of 2)
    Oil Pipes from Circulator to Oil Drain Unit (Pack of 2)
    Temperature Node
    Node Extension
    Triple Node Socket
    Jacket Vessel Lid (UK & EU)
    Reaction Vessel Drip Tray
    Stirrer - Glass 3 Blade Retreat Impeller Cut Length x 45mm dia
    Jacketed Vessel 100 ml Round Bottom
    Jacketed Vessel 250 ml Round Bottom
    Jacketed Vessel 500 ml Round Bottom
    Jacketed Vessel 1 litre Round Bottom
    Jacketed Vessel 2 litre Round Bottom
    Reaction Vessel Seal (FFKM)
    6mm Dia RTD Probe Holder
    8mm Dia RTD Probe Holder
    RTD Probe - PTFE Coated 200mm x 6mm
    RTD Probe - PTFE Coated 300mm x 8mm
    RTD Probe - PTFE Coated 400mm x 8mm
    Stirrer - PTFE 3 Blade Retreat Impeller 400mm x 75mm dia
    RTD Probe - PTFE Coated 100mm x 6mm
    Jacketed Vessel Lid (US)
    Circulator (Julabo CF40) 115V / 60HZ
    Gold Cold Circulator (Julabo FP51-SL) 230V / 60Hz / 3Phase
    Circulator (Julabo CF40) 230V / 50HZ
    Gold Cold Circulator (Julabo FP51-SL) 400VC / 50Hz / 3Phase
    Stirrer - Glass 3 Blade Retreat Impeller Cut Length x 75mm dia
    Stirrer - PTFE Anchor 500mm x 80mm dia
    RTD Probe - PTFE Coated 500mm x 9mm
    Stirrer - PTFE 3 Blade Retreat Impeller 500mm x 75mm dia
    Julabo Circulator Fluid (+20 to +250C) for Open Baths, 10 Litres
    Julabo Circulator Fluid (-50 to +105C) for Open Baths, 10 Litres
    Julabo Circulator Fluid (-20 to +180C) for Open Baths, 10 Litres
    Stirrer - PTFE 3 Blade Retreat Impeller 650mm x 75mm dia
    Circulator (Julabo CF40) 100V / 60Hz
    Bronze Circulator (Julabo CF41) 115V / 60Hz
    Bronze Circulator (Julabo CF41) 230V / 50Hz
    Copper Circulator (Julabo CF30) 100V / 60Hz
    Copper Circulator (Julabo CF30) 115V / 60Hz
    Copper Circulator (Julabo CF30) 230V / 50Hz
    Jacketed Vessel 5 litre Round Bottom
    Jacketed Vessel 3 litre Round Bottom
    RTD Probe - PTFE Coated 600mm x 9mm
    Stirrer - Glass Anchor 300mm x 36mm
    Huber Circulator - Unistat Petite Fleur (230V 1Ph 50Hz)
    Huber Circulator - Unistat 705 (230V 1Ph 50Hz)
    Huber Circulator - Unistat 705 (208V 2Ph 60Hz)
    Huber Circulator - Unistat Tango Nuevo (230V 1Ph 50Hz)
    Huber Circulator - Unistat Tango Nuevo (208V 2Ph 60Hz)
    Huber Circulator - Unistat Petite Fleur (115V 1Ph 60Hz)
    Huber Circulator - CC510 (400V 3Ph 50Hz)
    Huber Circulator - CC510 (208V 2Ph 60Hz)
    Huber Circulator - CC505 (230V 1Ph 50Hz)
    Huber Circulator - CC505 (208V 2Ph 60Hz)
    Huber Circulator - Ministat 240-cc (230V 1Ph 50Hz)
    Huber Circulator - Ministat 230-cc (230V 1Ph 50Hz)
    Huber Circulator - Ministat 125-cc (230V 1Ph 50Hz)
    Huber Circulator - Unistat Petite Fleur (208V 2Ph 60Hz)
    Huber Circulator - Ministat 230-cc (115V 1Ph 60Hz)
    Huber Circulator - Ministat 125-cc (100-115V 1Ph 50-60Hz)
    Julabo Circulator Fluid (-40 to +250C) Closed Bath Presto, 10 Litres
    Julabo Circulator Fluid (-85 to +170C) Closed Bath Presto, 10 Litres
    Huber Circulator Fluid (-60 to +115C) Open/Closed Units, 10 Litres
    Huber Circulator Fluid (-40 to +165C) Open/Closed Units, 10 Litres
    Huber Circulator Fluid (-20 to +235C [Closed]/+195C [Open]), 10 Litres
    Huber Circulator Fluid (+20 to +275C) Open/Closed Units, 10 Litres
    Huber Circulator Fluid DW-Therm (-90 to +200C) for Closed Units, 10 Litres
    Silver Circulator (Julabo FP50-HL) 230V / 50Hz
    Silver Circulator (Julabo FP50-HL) 230V / 60Hz
    Bronze Circulator (Julabo CF41) 230V / 60Hz
    Circulator (Julabo CF40) 230V / 60Hz
    Copper Circulator (Julabo CF30) 230V / 60Hz
    Gold Circulator (Julabo Presto A40) 230V 50/60Hz (UK Plug)
    Gold Circulator (Julabo Presto A40) 230V 50/60Hz (EU Plug)
    Gold Circulator (Julabo Presto A40) 208V 60Hz (US Plug)
    5L Jacketed Vessel Round Bottom (Requires Globe Offset Assembly 2200636)
    Huber E-Grade Exclusive Upgrade for Ministat and CC (9495)
    PTFE Anchor 600mm x 80mm dia
    PTFE 4 Blade Propellor 600mm x 60mm dia
    Base to Circulator Serial Cable (RJ11 to DB9 Male)
    Overflow Displacement Tank - Ministat 125
    Overflow Displacement Tank - Ministat 230
    Overflow Displacement Tank - Ministat 240

    Downloads

      Name Type Format Language Download
    Atlas Brochure Brochure PDF E Link to file
    Atlas Syringe Pump Brochure Brochure PDF E Link to file
    Atlas Potassium Flyer PDF E Link to file
    Atlas Jacketed Reactors Video MOV E View
    Atlas Overview Video MOV E View

     

    Related Categories

    Contact

    • Marc Ujma
    • Product Specialist Synthesis
    • ph. +49 (0)2064 427-281